dmesg - 2013-07-03 08:28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/P6X58D PREMIUM, BIOS 1501 05/10/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 1C0000000 mask FC0000000 uncachable
1 base 000000000 mask E00000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BF800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000bf780000
0000000000 - 00bf600000 page 2M
00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-00000001c0000000
0100000000 - 01c0000000 page 2M
kernel direct mapping tables up to 1c0000000 @ bf77c000-bf780000
RAMDISK: 36bfa000 - 375f5000
ACPI: RSDP 00000000000fb9e0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf780100 00064 (v01 051011 XSDT1028 20110510 MSFT 00000097)
ACPI: FACP 00000000bf780290 000F4 (v03 051011 FACP1028 20110510 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 0B384 (v01 A1382 A1382001 00000001 INTL 20060113)
ACPI: FACS 00000000bf798000 00040
ACPI: APIC 00000000bf780390 000D8 (v01 051011 APIC1028 20110510 MSFT 00000097)
ACPI: MCFG 00000000bf780470 0003C (v01 051011 OEMMCFG 20110510 MSFT 00000097)
ACPI: OEMB 00000000bf798040 00072 (v01 051011 OEMB1028 20110510 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 00038 (v01 051011 OEMHPET 20110510 MSFT 00000097)
ACPI: ASPT 00000000bf798360 00034 (v06 051011 PerfTune 20110510 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 000B0 (v01 051011 OEMOSFR 20110510 MSFT 00000097)
ACPI: SSDT 00000000bf79a1c0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000001c0000000
Initmem setup node 0 0000000000000000-00000001c0000000
NODE_DATA [00000001bfffb000 - 00000001bfffffff]
[ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9600000-ffff8801be9fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x001c0000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000bf780
0: 0x00100000 -> 0x001c0000
On node 0 totalpages: 1570573
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3920 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765880 pages, LIFO batch:31
Normal zone: 10752 pages used for memmap
Normal zone: 775680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
PM: Registered nosave memory: 00000000bf780000 - 00000000bf798000
PM: Registered nosave memory: 00000000bf798000 - 00000000bf7dc000
PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8801bfc00000 s82944 r8192 d23552 u131072
pcpu-alloc: s82944 r8192 d23552 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1545480
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6109676k/7340032k available (3425k kernel code, 1057740k absent, 172616k reserved, 3314k data, 576k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:1216 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2806.783 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5613.56 BogoMIPS (lpj=11227132)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 98000
calibrate_delay_direct() dropping max bogoMips estimate 0 = 39664494
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#7
smpboot cpu 7: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (44900.59 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at bf798000 (278528 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf7983a0 01E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 01E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfb8ff000-0xfb8ff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfb8f8000-0xfb8fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfb8fe000-0xfb8fe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x8c00-0x8c07]
pci 0000:00:1f.2: reg 14: [io 0x8880-0x8883]
pci 0000:00:1f.2: reg 18: [io 0x8800-0x8807]
pci 0000:00:1f.2: reg 1c: [io 0x8480-0x8483]
pci 0000:00:1f.2: reg 20: [io 0x8400-0x841f]
pci 0000:00:1f.2: reg 24: [mem 0xfb8fc000-0xfb8fc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfb8fd000-0xfb8fd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x1000-0x101f]
pci 0000:01:00.0: [1b4b:9123] type 0 class 0x000106
pci 0000:01:00.0: reg 10: [io 0xac00-0xac07]
pci 0000:01:00.0: reg 14: [io 0xa880-0xa883]
pci 0000:01:00.0: reg 18: [io 0xa800-0xa807]
pci 0000:01:00.0: reg 1c: [io 0xa480-0xa483]
pci 0000:01:00.0: reg 20: [io 0xa400-0xa40f]
pci 0000:01:00.0: reg 24: [mem 0xfb9ff800-0xfb9fffff]
pci 0000:01:00.0: reg 30: [mem 0xfb9e0000-0xfb9effff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:02:00.0: reg 10: [mem 0xfbafe000-0xfbafffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:03:00.0: [1002:6738] type 0 class 0x000300
pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xfbbc0000-0xfbbdffff 64bit]
pci 0000:03:00.0: reg 20: [io 0xb000-0xb0ff]
pci 0000:03:00.0: reg 30: [mem 0xfbba0000-0xfbbbffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: [1002:aa88] type 0 class 0x000403
pci 0000:03:00.1: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:06:00.0: [11ab:4364] type 0 class 0x000200
pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:05:00.0: [11ab:4364] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [mem 0xfbcfc000-0xfbcfffff 64bit]
pci 0000:05:00.0: reg 18: [io 0xc800-0xc8ff]
pci 0000:05:00.0: reg 30: [mem 0xfbcc0000-0xfbcdffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:08:02.0: [1106:3044] type 0 class 0x000c00
pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
pci 0000:ff:00.0: [8086:2c41] type 0 class 0x000600
pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600
pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600
pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600
pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600
pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600
pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600
pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600
pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600
pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600
pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600
pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600
pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600
pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600
pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600
pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600
pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600
pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600
pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d400 - 000000000009ffff
reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfbf00000-0xfbffffff]
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfec8a000-0xfec8afff]
pnp 00:01: [mem 0xfed10000-0xfed10fff]
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0290-0x029f]
system 00:06: [io 0x0290-0x029f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x004d]
pnp 00:07: [io 0x0050-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x1000-0x0fff disabled]
pnp 00:07: [io 0x0500-0x057f]
pnp 00:07: [io 0x0600-0x0607]
pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed40000-0xfed8ffff]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [io 0x0600-0x0607] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [mem 0xffa00000-0xffbfffff]
pnp 00:09: [mem 0xffe00000-0xffffffff]
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0a: [mem 0xffc00000-0xffdfffff]
system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xe0000000-0xefffffff]
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0xbfffffff]
pnp 00:0d: [mem 0xfed90000-0xffffffff]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0400000-0xc07fffff]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc07fffff]
pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: resource 1 [mem 0xc0400000-0xc07fffff]
pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10220k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bb77c000 - ffff8800bf77c000
software IO TLB at phys 0xbb77c000 - 0xbf77c000
audit: initializing netlink socket (disabled)
type=2000 audit(1372837041.048:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 11952
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 66 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 1536k, total 1536k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ERST: Table is not found!
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2013-07-03 07:37:21 UTC (1372837041)
Initializing network drop monitor service
Freeing unused kernel memory: 576k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 652k freed
Freeing unused kernel memory: 692k freed
udevd[79]: starting version 175
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
sky2: driver version 1.30
sky2 0000:06:00.0: setting latency timer to 64
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:06:00.0: irq 67 for MSI/MSI-X
sky2 0000:06:00.0: eth0: addr 48:5b:39:12:e8:09
sky2 0000:05:00.0: setting latency timer to 64
sky2 0000:05:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:05:00.0: irq 68 for MSI/MSI-X
usbcore: registered new device driver usb
sky2 0000:05:00.0: eth1: addr 48:5b:39:12:d8:02
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
libata version 3.00 loaded.
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb8ff000
xhci_hcd 0000:02:00.0: setting latency timer to 64
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 76 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:02:00.0
uhci_hcd: USB Universal Host Controller Interface driver
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb8fe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 77 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:08:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb8fc000 port 0xfb8fc100 irq 77
ata2: SATA max UDMA/133 abar m2048@0xfb8fc000 port 0xfb8fc180 irq 77
ata3: SATA max UDMA/133 abar m2048@0xfb8fc000 port 0xfb8fc200 irq 77
ata4: SATA max UDMA/133 abar m2048@0xfb8fc000 port 0xfb8fc280 irq 77
ata5: SATA max UDMA/133 abar m2048@0xfb8fc000 port 0xfb8fc300 irq 77
ata6: SATA max UDMA/133 abar m2048@0xfb8fc000 port 0xfb8fc380 irq 77
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
ahci 0000:01:00.0: irq 78 for MSI/MSI-X
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
ahci 0000:01:00.0: setting latency timer to 64
ahci 0000:01:00.0: port 0 can do FBS, forcing FBSCP
ahci 0000:01:00.0: port 1 can do FBS, forcing FBSCP
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
scsi6 : ahci
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
scsi7 : ahci
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1a.1
ata7: SATA max UDMA/133 abar m2048@0xfb9ff800 port 0xfb9ff900 irq 78
ata8: SATA max UDMA/133 abar m2048@0xfb9ff800 port 0xfb9ff980 irq 78
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1a.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: UHCI Host Controller
usb usb9: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
usb usb9: SerialNumber: 0000:00:1d.1
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: UHCI Host Controller
usb usb10: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
usb usb10: SerialNumber: 0000:00:1d.2
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ata7: SATA link down (SStatus 0 SControl 370)
usb 1-6: new high-speed USB device number 3 using ehci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 370)
ata8.00: ATA-9: C300-CTFDDAC128MAG, 0002, max UDMA/100
ata8.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/100
ata1.00: ATA-7: WDC WD4000YR-01PLB0, 09.06A09, max UDMA/133
ata1.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
firewire_core: created device fw0: GUID 001e8c0000cf53a9, S400
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD4000YR-01P 09.0 PQ: 0 ANSI: 5
usb 1-6: New USB device found, idVendor=13fe, idProduct=3100
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Patriot Memory
usb 1-6: Manufacturer:
usb 1-6: SerialNumber: 07A21200174EA23D
Initializing USB Mass Storage driver...
scsi8 : usb-storage 1-6:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Refined TSC clocksource calibration: 2806.363 MHz.
Switching to clocksource tsc
usb 6-1: new full-speed USB device number 2 using uhci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
usb 6-1: New USB device found, idVendor=046d, idProduct=c52b
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB Receiver
usb 6-1: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input2
usb 9-2: new low-speed USB device number 2 using uhci_hcd
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 > sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 9-2: New USB device found, idVendor=046d, idProduct=c50e
usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-2: Product: USB RECEIVER
usb 9-2: Manufacturer: Logitech
input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/input/input0
generic-usb 0003:046D:C50E.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.1-2/input0
scsi 8:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: [sdc] 15654912 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdc] No Caching mode page present
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] No Caching mode page present
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 8:0:0:0: [sdc] No Caching mode page present
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Attached SCSI removable disk
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: PLEXTOR DVDR PX-880SA, 1.03, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM PLEXTOR DVDR PX-880SA 1.03 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
scsi 7:0:0:0: Direct-Access ATA C300-CTFDDAC128M 0002 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdd] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 7:0:0:0: [sdd] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: Attached scsi generic sg2 type 0
sr 4:0:0:0: Attached scsi generic sg3 type 5
sd 7:0:0:0: Attached scsi generic sg4 type 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
PM: Starting manual resume from disk
PM: Hibernation image partition 8:3 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
udevd[493]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
wmi: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input3
ACPI: Requesting acpi_cpufreq
EDAC MC: Ver: 2.1.0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
ACPI: resource 0000:00:1f.3 [io 0x1000-0x101f] conflicts with ACPI region SMRG [io 0x1000-0x100f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 5780 MBytes.
[fglrx] vendor: 1002 device: 6738 count: 1
[fglrx] ioport: bar 4, base 0xb000, size: 0x100
pci 0000:03:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.98.2 [Jul 19 2012] with 1 minors
snd_hda_intel 0000:00:1b.0: irq 79 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC889: BIOS auto-probing.
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
snd_hda_intel 0000:03:00.1: irq 80 for MSI/MSI-X
snd_hda_intel 0000:03:00.1: setting latency timer to 64
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input5
Adding 3297276k swap on /dev/sda3. Priority:-1 extents:1 across:3297276k
Adding 2799612k swap on /dev/sdb3. Priority:-2 extents:1 across:2799612k
EXT4-fs (sdb1): re-mounted. Opts: (null)
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
loop: module loaded
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
sky2 0000:06:00.0: eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 0000:06:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
sky2 0000:05:00.0: eth1: enabling interface
ADDRCONF(NETDEV_UP): eth1: link is not ready
postgres (3142): /proc/3142/oom_adj is deprecated, please use /proc/3142/oom_score_adj instead.
sky2 0000:05:00.0: eth1: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
fglrx_pci 0000:03:00.0: irq 81 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 3719
[fglrx] Firegl kernel thread PID: 3720
[fglrx] Firegl kernel thread PID: 3721
[fglrx] IRQ 81 Enabled
[fglrx] Gart USWC size:1280 M.
[fglrx] Gart cacheable size:508 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
eth0: no IPv6 routers present
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
eth1: no IPv6 routers present
HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
input: Logitech Unifying Device. Wireless PID:2010 as /devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.2/0003:046D:C52B.0003/input/input6
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:1a.1-1:1